Friday, 24 March 2017


Hi everyone

I bet you've all been wondering how this build has been going and I have been meaning to update the blog with where its at right now.  Well we have a Roof! So thats a start.  Its also been waterproof wrapped as we now head into Autumn, so even though its not weather-tight quite yet its still keeping the recent rain off the framing and most of the interior.  Next week the Brick exterior cladding starts, the windows are due, and we are also about to spend time with the electrician deciding on the lights, light switches and power points etc.  I will update a bit more on that further in the blog but first lets do a photo timeline update so you can all go OOH & AAH at it 😀

Photo Timeline

Week One

Week One - Day One - Excavation Starts

Week One - Day 5 - the rib raft floor starts

Week Two 

Week Two - Day 1 - the rib raft framing is down
Week two - Day 3 - the Concrete Slab is done

Week Three

The framing begins:

And Aerial shot taken by our builder showing the frame - it looks so like the plans!

Week Four

Looking at the spot the large sliding doors will go (this is the side of the house)

Looking at the front of the house the lounge windows to the left and the front entrance in the middle

Week Five 

An Aerial view of the trusses for the roof

The scaffolding is up and the roof goes on soon

The front of the house is now starting to look like a house

Week Six 

The roof is done! The waterproof wrap is being done and the
scaffolding will come down soon

Week 6 - Day 5 - the framing for the gib is already
 going into the garage - soon they will start to line the interior

Whats due next?

Well its Autumn here and the weather is starting to settle in so its great that they got the roof on when the weather was better and they will have a more or less dry area to work in.  In the next few weeks they will be pre-wiring the house, starting to put up the battens for the gib (drywall), reinforcing the walls where we want shelving or things hanging from the wall like rails, and obviously the exterior starts to come together.

LifeMark Accessibility and the Electrical Walkthrough

So next week we have the Electrical walkthrough with the Electrician to work out where lights will go, power outlets, heated towel rails and other items.  So the Husband has spent time going through our LifeMark assessment to make sure we have it all in hand and can spend time explaining to the Electrician just WHERE things can go.  

The guidelines are quite specific. For a start, plugs can't be put within 30 cm of the floor. For 'bonus points' plugs should be at a consistent height between 50 and 120 cm from the floor, and for even more points plugs should not be within 50 cm of an internal corner.

Humm... Keeping plugs out of the corners should be fairly easy, but having them all at mid-thigh height in all rooms will be be challenging,

One thing the Husband is keen on is recessed low-intensity lighting in the hall - like what you have on stairs - with the reasoning that we are often up in the night to check in on the boy. The number and placing of these lights has become a bit contentious.  He also worried about the power they would use for awhile - the LED lights are rated at 1W, but the driver losses need to be taken into account. Two 1W lights for 12 hours a day, for a month is about  1kWhr - or 20c of power. per month. Less than a cent a day to not stumble round in the dark every night is well worth while.

Talking of lighting, the location of light switches is also specified in the standard. They should be at the same height as the door handles, Must make sure that the electrician and builder agree about the handle height. We also need to have light-switches at both ends of the corridors, its giving us a small problem as we have three doors entering the end of the hall, so do not have a clear wall space to place the switch on! 

We also discussed including some hard-wired panel heater, which seem like a good idea as they will be low-profile and not obstruct moving a wheelchair around, and avoid having cables over the floor. The downside is we will need to know where the furniture will be to avoid having a heater where we will want to place the bed. It is a tough call, as we tend to have a heater on overnight during winter to help avoid winter snuffles and chills. Not having these also avoids having to decide what wattage heater to install. So a compromise might be to install an extra power point where we might want to hard-wire a heater once we get settled in. 

There is always so much to think about with these things its easy to get overwhelmed!  One thing I still wish we'd considered was removing the wardrobe doors and turning the wardrobe into a recess we can use for 'parking' equipment.  Other families have chosen to do that and it makes sense to have the wheelchair, walker and maybe the standing frame somewhere out of the way.  Of course we are also in the middle of teaching the young man to self transfer to his wheelchair, his walker and possibly the bed.  All this means that the equipment needs to be within easy reach.  No doubt as the house progresses we'll have a clearer idea of all that.

We'll try to update again as the build progresses, thanks for stopping by to view our blog!


An English Tutorial of Finnleys Freya & Kroodie Sweatshirt Pattern - PART ONE

I have been looking for sometime for a good sweatshirt pattern for my son for the upcoming Winter Months.  Inspired by some great hoodies I have seen on Pinterest I found my way to the German language pattern Kroodie which is a variation pattern for the Freya Vest.  Both are designed and sold by Finnleyswelt and can be purchased from their website/shop.

I only discovered after buying them both that the Kroodie only goes up to size 134cm whereas the Freya pattern I brought was for size 140cm and above!
Because my little guy is almost 10 years old but not quite there in height yet (hes probably only 135cm tall) hes stuck in the inbetween sizes, basically a size 134-140cm so I brought the two patterns I needed.  I was surprised when I realised the Kroodie was just a variation for the Freya child vest pattern and only came in sizes 74cm - 134cm.  But nevertheless I can grade the sleeve variation from 134cm to 140cm and above fairly easily.

What was that you said?

So then I embarked on translating using Google Translate the downloaded and purchased  PDF patterns.  It made for some hilarity when I tried to then translate the translation as 'Rubber' was a translation from the German 'Gummi'.  It turned out Gummi was actually elastic (thanks to the picture tutorial in the pattern) and that the tunnel the translation referred to was in fact the elastic casing.  You can imagine my confusion when it said Rubber Tunnel??

I then googled and went a bit silly surfing endlessly on Pinterest in the hopes there might be a tutorial in English.  Either I just chose the wrong phrase or one just didn't exist because there didn't seem to be one out there in Internet Land.  So that brings us to this blog entry.  If you like the look of the Freya Vest with the Kroodie variations (Sleeve & tube neck) but like me aren't a native German speaker I am hopeful my tutorial will inspire you or at the very least fill that gap on the Internet for those that want to make a stylish sweatshirt for your child too.

I must admit those German designers know how to design some stylish clothing for our kids!

Heres some inspiration I found on the internet using the Freya+Kroodie pattern (click on the photo to be taken to the website with more info not in english though)

Stubbielau's beautifully made Freya+Hoodie in size 122cm
Nadelzaubers gorgeous girls variation of the Freya+Kroodie

You'll find plenty more inspiration at Finnleys Gallery page
What the Freya vest looks like without the Kroodie sleeves 

Printing out the Downloaded Pattern

Now its time to start testing the pattern after much fiddling about working out what it is I had and printing out the pattern pieces then sellotaping together it was time to find my sweatshirting and prepare to cut out.  The german language tutorial that comes with the Freya pattern (which is the main one you'll need to make the vest without the sleeves (the standard Freya design)) has a handy chapter printout list on page 5 but unless you're quite good with German you will still need to work out which pages to printout and keep together.  Unfortunately the pages aren't numbered and there doesn't appear to be a legend to help you work out which pattern pieces go with which when sellotaping them together.  So I will try and help you below.  In saying that though page 7 does have a picture with a sort of list to help you work out what to cut and how many pieces.  Again its in German.  But you can sort of work it out.
I am going to be sewing a Freya+Kroodie sweatshirt for my boy so I will be grading the Kroodie plain sleeve pattern (with the ribbed cuff) to a size 140cm to match the Freya vest size 140cm from the other downloaded pattern.  
So going by the cutting list on page 7 and the printing list on page 5, I chose to printout pages 13-24 of the Schnittmuster (Pattern) and pages 37-40 - I am hoping all those pieces will be what I need to make the vest at least! 
I will endeavour to take photos of my piecing the pieces together and showing you the cutting out of the pattern so you too can make sense of it all when the time comes to make your own.

Stay tuned for PART TWO - CUTTING OUT